088423 | RGBF06X16-772L-M - фото 1 - id-p93677881

Характеристики и описание

Mechanical values and environment
Design	Upright, according to DIN 43697
Material
Active face	PBT
Housing material	Die-cast aluminum
Weight
Net	1,2 kg Connection terminals
Ambient temperature	-25 ... 70 °C
Degree of protection	IP67
Proximity switch spacing	16 mm
Switching principle	NO + NC
Switching frequency	max.500 Hz
Number of switching elements	6
Number of NC contacts/NO contacts	6
Connection
4 x	M25 x 1.5
Electrical connection ratings
Operating voltage
DC	10 ... 55 V
Rated operating current I_e	250 mA
Utilization category according to EN 60947-5-2
DC-12	DC-13 The output is to be protected with a free-wheeling diode for inductive loads.
Short circuit and overload protection, pulsed	Yes
Rated insulation voltage U_i
DC	60 V
Residual ripple	max.10 %
Reverse polarity protection	Yes
EMC protection requirements	EN IEC 60947-5-2
Type of output	PNP
No-load current I₀	max.15 mA
Off-state current I_r	max.0,001 mA
Voltage drop U_d	max.2,5 V
Connection cross-section	0,34 ... 1,5 mm?
LED indicator	Yes
Operating distance
Repeat accuracy R
According to EN 60947-5-2	max.5 %
Rated operating distance S_n	5 mm
Assured operating distance S_a	0 ... 4 mm Dimension only applies for steel (ST37) and for EUCHNER trip dogs of series UX.. / GX..
Switching hysteresis	max.0,5 mm
Miscellaneous
Additional information	Switching elements with 5mm operating distance (16mm proximity switch spacing) are supplied with two different oscillator frequencies to avoid mutual interference. Multiple limit switches must therefore be assembled alternately with these switching elements.