Характеристики и описание
Описание оборудования | |
|---|---|
| Distance sensor | |
General specifications | |
| Measurement range | 100 ... 550 mm |
| Reference target | standard white, 100 mm x 100 mm |
| Light source | LED |
| Light type | modulated visible red light |
| LED risk group labelling | exempt group |
| Angle deviation | max. +/- 1.5 ° |
| Diameter of the light spot | approx. 20 mm at a distance of 550 mm |
| Angle of divergence | 2.5 ° |
| Ambient light limit | EN 60947-5-2 : 45000 Lux |
| Resolution | 0.1 mm |
Functional safety related parameters | |
| MTTFd | 520 a |
| Mission Time (TM) | 20 a |
| Diagnostic Coverage (DC) | 0 % |
Indicators/operating means | |
| Operation indicator | LED green: constantly on - power on flashing (4Hz) - short circuit flashing with short break (1 Hz) - IO-Link mode |
| Function indicator | LED yellow: constantly on - switch output active constantly off - switch output inactive |
| Control elements | Teach-In key |
| Control elements | 5-step rotary switch for operating modes selection |
Electrical specifications | |
| Operating voltage | 18 ... 30 V DC |
| Ripple | max. 10 % |
| No-load supply current | < 25 mA at 24 V supply voltage |
| Protection class | III |
Interface | |
| Interface type | IO-Link ( via C/Q = pin 4 ) |
| Device profile | Identification and diagnosis Smart Sensor type 0/type 3.3 |
| Transfer rate | COM2 (38.4 kBaud) |
| IO-Link Revision | 1.1 |
| Min. cycle time | 3 ms |
| Process data witdh | Process data input 4byte Process data output 2bits |
| SIO mode support | yes |
| Device ID | 0x111903 (1120515) |
| Compatible master port type | A |
Output | |
| Switching type | The default setting is: C/Q - Pin4: NPN normally open, PNP normally closed, IO-Link U—Pin2: analog output 0 ... 10 V |
| Signal output | 1 push-pull output , 1 analog output , short-circuit-proof, reverse polarity protection, surge-proof |
| Switching voltage | max. 30 V DC |
| Switching current | max. 100 mA , resistive load |
| Usage category | DC-12 and DC-13 |
| Voltage drop | ? 1.5 V DC |
| Response time | 2 ms , see table 1 |
Analog output | |
| Output type | 1 voltage output: 0 ... 10 V |
| Load resistor | > 1 k? voltage output ; ? 470 ? current output |
Conformity | |
| Communication interface | IEC 61131-9 |
| Product standard | EN 60947-5-2 |
Measurement accuracy | |
| Temperature drift | 0.05 %/K |
| Warm up time | 5 min |
| Repeat accuracy | ? 1 % , see table 1 |
| Li | |
Описание оборудования
Distance sensor OMT550-R200-UEP-IO-V31
Под заказ
Цену уточняйте
Минск ∙
Доставка
Оплата и гарантии